First I want to thank everyone for reading JetsonHacks.com, and wish everyone a super duper 2017. It’s usually fun to recap some statistics about the website, I know sometimes people are curious to see how many other people are using JetsonHacks. JetsonHacks Website The following chart helps give you an idea Read more …
You just finished looking at TensorFlow on NVIDIA Jetson TX1 Development Kit and are wondering, “Is there anyway that I could actually use TensorFlow on the Jetson TX1 without having to compile the whole thing myself?” The official JetsonHacks response? “No. Suck it up!” This is an unofficial post, just Read more …
Building TensorFlow on the NVIDIA Jetson TX1 is a little more complicated than some of the installations we have done in the past. Looky here: Background TensorFlow is one of the major deep learning systems. Created at Google, it is an open-source software library for machine intelligence. The Jetson TX1 ships Read more …
Adding a swapfile and doing some preparation for development is one of the first things to do after flashing a NVIDIA Jetson Development Kit. Looky here: Background Over the last couple of years, the software capabilities of the Jetson Development Kits have increased dramatically. JetPack does a great job of Read more …
In the previous article on the LIDAR on a Chip, some folks asked if it is possible to run the chip outdoors. Looky here: This is just a short article on how the test was done. The LIDAR on a Chip in this article is a VL53L0X from ST Microelectronics. Read more …
ST Microelectronics recently introduced an inexpensive single chip time of flight sensor. The VL53L0X can be interfaced to a Jetson Development Kit (either TX1 or TK1) over I2C. Looky here: Background The last couple of years have seen a major push towards solid state LIDAR. As autonomous vehicles, robotics and Read more …
Intel provides an open source ROS package for their RealSense cameras. In this article, we install the package on the Jetson TX1. In the video, we even take the package out for a spin with a RealSense R200 camera connected to a Jetson TX1. Looky here: Background The Intel RealSense Read more …
NOTE: Updated Article for installation on L4T 28.2 now available. This article is deprecated. Robot Operating System (ROS) can now be installed from Debian packages on the 64-bit L4T 24.2 Jetson TX1. Looky here: Background As discussed previously, the 64-bit ARM environment is relatively new. This means that most applications, Read more …
NOTE: This article has been updated for use with L4T 28.1+. Please see: Intel RealSense Camera librealsense – NVIDIA Jetson TX Dev Kits Intel RealSense cameras can use an open source library called librealsense as a driver for the Jetson TX1 development kit. Looky here: Background Note: This article is Read more …
In our last article, we built a kernel for the Jetson TX1. In this article, we go over an example of how to build a simple module for the ubiquitous Sony PlayStation Eye for the Jetson TX1. Looky here: Preface Note: If all you are looking for is a prebuilt Read more …
Copyright @ JetsonHacks 2014-2021